-
It's all in the title. Firmware was updated just before with the required options.
Anything I should test?
AFAIK the absence of `pages_ready` is because of CDC serial hardware
```
$ cat prin…
-
Hello, in your firmware, the autocalibration of the table does not work. what could this be related to?
-
Hi there,
Was brainstorming on how to improve the firmware and figured I'd make a suggestion for an idea for automatic bed leveling, without probe.
Of course, I will work on this on my own branc…
-
**Is your feature request related to a problem? Please describe.**
My printbed is not completely flat. I use auto bed leveling but that's not always perfect.
**Describe the solution you'd like**
…
-
I try applying a bed mesh, doing the bl touch z offset, and the normal z offset. I am still having issues where my first few layers are different from the left and right sides of the bed. The left sid…
-
### Is your feature request related to a problem? Please describe.
My BLTouch (and according to my result when searching for this problem I am not alone) will sometimes fail to meassure/retract.
S…
-
- This is not fixed by fixing #4
- Due to an issue in Cura, the first nozzle bed temperature (or hottest?) is always used even if all aspects of the project file are set to the second extruder (eithe…
-
### Describe the bug
the wled integration doesnt respond when for example the front cover falls off. or if filament is empty.
### To Reproduce
start a print
and pull during print front cover of th…
jl-p updated
7 months ago
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Home position + Z Offset does not make sense.
When Z Offset is set to > or < 0.00, t…
-
BL Touch no longer functions properly after latest compiled firmware release. On boot machine gives errors of "invalid mesh" and
"failed to enable Bed Leveling."
BL Touch tests fine from menu but…