-
Wish: Support WebThing API from mozilla
Then device could be connected (and controlled by) moziot gateway,
if feature is desired then it should be easy to add
Some hints at:
https://github…
-
In an effort to keep track of HATs, pHATs and Rasperry Pi add-ons which have not yet been documented on Pinout.xyz I'm compiling a - probably not - comprehensive list here. This list should give me (a…
-
I'm looking at using my Arduino as a proxy between a PS4 and a PS4 controller.
To do this I need to forward the authentication process between the 2 devices as described here:
https://forum.gimx.f…
-
I want to add support for Arduino Nano Every board and [ATMega4809](http://ww1.microchip.com/downloads/en/DeviceDoc/ATmega4808-09-DataSheet-DS40002173B.pdf) chip.
Will start after #88
@Rahix s…
-
Dear kakopappa,
first of all congratulations for your genius project and many thanks for your effort.
I tried some of your examples but get an error during compilation.
Arduino\libraries\ardui…
-
#### Description
While testing arduino-zero+xbee to samr21-xpro communication during the testing phase of 2018.10 I noticed, that sometimes the initialization of the network interface fails. To check…
-
While starting to use RTT as the stdio for an STM32L496VG based board `make term` was not working. It still worked with JLink v6.92.
#### Steps to reproduce the issue
I've configured a board to u…
-
**Describe the problem you have/What new integration you would like**
The ability to have a battery powered esp device that can programme another device via OTA
**Please describe your use ca…
-
After loading either Arduino example to my board, I do not get a notification message with the link to the landing-page. The rest of WebUSB seems to work, because I can use the console example to send…
-
Hi Traumflug,
I'd be interested in adapting teacup to the ESP8266, using its Arduino board definition (https://github.com/esp8266/Arduino)
Where will I have to start ? What areas need attention ? I …