-
Hello,
I followed the instructions on adding _/etc/udev/rules.d/99-dmr.rules_ and added the recommended values:
> \# TYT MD-UV380
> SUBSYSTEM=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}==…
-
This isn't an issue, but I didn't want to create a Wiki until I was sure this worked.
I created a Digikey shopping cart that contains all of the parts (except the board itself) that you'll need to bu…
-
The RF24 modules are pumping out pretty low range. Possibly turning down the bitrate and adding an antenna could fix this, but I'm not totally sure. Maybe before full deployment we could either swap r…
-
In Chapter 6. Dual Watch it says that "Certain functions are not available while in dual watch mode:"
With newer firmware revisions, these limitations have been removed (the first 2 anyway).
-
Hi,
Do you think is feasible to have a timeout timer to turn off transmitters after certain amount of time (for example 3 minutes) to avoid a transmitter damage due to continuous transmit?
Thank…
-
There seems to be an issue with some packets (or special characters), that causes this error/overflow below.
This is running with current head of master of direwolf with the following params on Ub…
-
Do you have information or a link for the cable you are using? How did you configure the PTT?
-
Hi
I have tried AFSK mic and cable input, also two radios. App show it gets sound, volume bar is moving correctly, but no decode. I have tried few versions of the app.
It was working few months ago,…
-
https://baofengtech.com/product/gmrs-pro-k1-adaptor/
https://baofengtech.com/product/bs-ptt/
-
I spent a few hours this afternoon attempting to try the new cats option. I programmed a sequence of APRS, Hv2, cats with 30 second repeating cycle. APRS and HV2 both transmitted and decoded. I could …