-
Can zigpy-cc support CC2538 / CC2538x chips by Texas Instruments if use Z-Stack 3 based firmware?
CC2538 (in combination with CC2592 amplifier) will reportedly be much better than CC2531
For ref…
-
I have exchanged my CC2531 stick with a Slaesh's CC2652RB stick (one of the two recommended adapter at zigbee2mqtt.io).
Unfortunately the serial port with this devices is on my RasPi _/dev/ttyUSB0_.
…
-
Die ZigBee Fernbedienung 500.67 von Paulmann wird beim Pairing nur als ? in der Übersicht angezeigt, und es werden keine typischen Datenpunkte für eine Fernbedienung angelegt.
Nachfolgend fotos.
…
-
Hello,
I have a CC2531 installed on a RPi 3.
I recently discovered your project. I used zigbee-sheperd during month and then I discovered your project. I reinstalled my RPi with node-red and I sta…
-
The subscriber client script subscribe.py will occasionally reach time out and stop logging data without fatal error. This has been observed to be preceded by the LED on the CC2531 USB dongle going th…
-
I am currently learning about the Zigbee protocol.
I try to find where I can buy APIMOTE and RZRaven USB but every shop is sold out.
Does anyone have a apimote or rzraven usb?
Would…
-
Hi. I am using cc2531 and have some problems with two channel aqara relay (LUMI lumi.relay.c2acn01). I can switch from frontend only first relay. If I press second channel switch there is no result an…
-
Hi. I am using cc2531 and have some problems with two channel aqara relay (LUMI lumi.relay.c2acn01). I can switch from frontend only first relay. If I press second channel switch there is no result an…
-
Hi,
When I'm paired E1524 device, I don't have zha_event when I'm click buttons. I tried to update firmware and it's fail on zero percent.
I check how it's works with cc2531 and zigbee2mqtt and …
-
I am new to Zigbee and bought a CC2531 stick. Managed to integrate it into my raspberrymatic. Until now I only have a Hue BT bulb which I managed also to pair (which took quite some time to be honest)…