-
After the latest update to ESPhome (2024.6.1) we had a problem with the OTA update.
It says that the `'platform: esphome'` should be added, but it's not clear where and in the .yaml specified [here…
-
I have a modified ZBMini with this configuration:
Input 2 is linked to Out…
-
Hi @tube0013 ,
i just bought a ESP32 CC2652 Coordinator from you and it arrived today. Now i wanted to test it in Homeassistant (in my case it is HA OS in a VM in my DMZ vlan).
The coordinator i…
-
### Reproduction steps
I have been attempting to make a contact sensor. I know that there is no example for the CC2652 boards or any TI boards. I attempted to port the contact sensor from the sample …
-
### What happened?
This is for Moes AM43-0.45/40-ES-EB (_TZE200_zah67ekd).
1. DPS 1 is used for multiple purposes.
- setting DPS 1 to 0, 1 or 2 will open, stop or close the cover respectively.…
-
What hardware would you recommend someone to buy for Z-Stack 3.x Zigbee coordinator firmware?
- https://github.com/Koenkk/Z-Stack-firmware/tree/master/coordinator
Personally I am low on funds ri…
Hedda updated
4 years ago
-
Since you support the older TI CC2531 with Zigbee Firmware i tried to use the newer one (CC2562 https://www.zigbee2mqtt.io/information/supported_adapters.html#slaeshs-cc2652rb-stick) but without succe…
-
### What happened?
I tried pairing the device but got constant interview errors
the device [info page](https://www.zigbee2mqtt.io/devices/BTH-RM230Z.html) is incomplete since it mentions nowhere t…
-
### Describe the issue you are experiencing
i think i found a bug or at the very least non-ideal-behavior from haos. i tried restoring from backup on a brand new install on the landing page after fla…
-
I have a network based Zigbee Coordinator (tubes Ethernet Coordinator https://www.tubeszb.com/product/cc2652_coordinator/1). Which works great with ZHA on Home Assistant. I can reboot or turn off Home…