-
Hi
I have 4 1080p PoE IP cameras running into MotionEye using rtsp
To start with I had the resolution at 1920x1080 and for motion detection and image grabs on motion detection this was fine.
…
-
I have successfully configured a Pi Zero camera using MotionEyesOS. I can access the camera by entering the IP address of the Pi Zero in my browser and Motioneye identifies the device as a V4L2 camera…
-
### Preliminary Docs
I confirm that I have read the [CONTRIBUTING](https://github.com/ccrisan/motioneyeos/blob/master/.github/CONTRIBUTING.md) guide before opening this issue.
I confirm that I h…
-
### Preliminary Docs
I confirm that I have read the [CONTRIBUTING](https://github.com/ccrisan/motioneyeos/blob/master/.github/CONTRIBUTING.md) guide before opening this issue.
I confirm that I h…
-
In the pitch feedback, our partner mentioned that 3D res-nets would be too large for most cameras. What are other potential solutions other than the suggested hardware installation?
-
Hi
I used Frigate in homeassistant
i added two things ,
1/ one link on lovelace (working well):
```
- title: sec
icon: mdi:cctv
cards:
- type: custom:frigate-card
ca…
-
Hi,
I use cctv-viewer on Bookworm (Debian 12).
The cameras are WiFi cameras, so a couple are located in not in good reception areas - weak signal.
Those one are frequently showing black, "End-of-me…
dcung updated
2 weeks ago
-
We need to discover similar projects and look at their design as well as features. So start searching the internet for similar projects and mention their URL and design, unique features, architecture,…
-
I'm a beginner on DNN but I've read a lot and I think I'm doing everything "by the book". However I think my training is not working well. I want to create a training for my CCTV system so I think it …
-
I've installed Abode Camera Streaming on a Raspberry Pi 4, per the instructions @ https://github.com/tradel/hassio-addons/tree/main/abode2rtc. I've verified that the components are all operational, an…