-
I have installed nexmon CSI and I want to collect CSI with two raspberry Pi 4.
I use PC to send ping packets to AP (which is pi4). The AP is connected to PC and the other Pi4.
Although the PC sends …
-
The global degree of genes are always representative of a z-score of 3, it should update when you change the significant edge score.
```ptyhon
In [69]: cob = co.COB("W2691") …
-
Hi,
is it possibly to add Bluetooth audio streaming? Could also be as a preset station to save buttons.
Here are some examples I found online:
[https://www.pschatzmann.ch/home/2020/03/27/1255…
-
Transfer of esp-rs/esp-idf-svc#442; Summary:
When I'm trying to compile this for the esp32c6 using riscv32imc-esp-espidf, I run into the following issue:
```
Compiling esp-idf-svc v0.49.0
e…
-
## Environment
- Development Kit: [ESP32-Wrover-Kit|ESP32-DevKitC|ESP32-PICO-Kit|ESP32-LyraT|ESP32-LyraTD-MSC|none]
- Kit version (for WroverKit/PicoKit/DevKitC): [v1|v2|v3|v4]
- Core (if us…
-
*sljansen:*
I did an upgrade on a WRT1900acs v2 router (my backup router) that was running 18.06.4 (I think) via LuCI using the image "openwrt-19.07.0-rc1-mvebu-cortexa9-linksys_wrt1900acs-squashfs-s…
-
failed to build the wifi_router example
```
Executing action: all (aliases: build)
Running ninja in directory /Users/dilsh/Documents/fyp/esp-iot-bridge/examples/wifi_router/build
Executing "ninja …
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Notice the hostapd.conf file extract below. All the lines that are commented out with # are not recognised on 6.9-rc but are recognised on openwrt for the BPI-R3.
I don't know if this is a hostapd p…
-
I am trying to install the TP-Link WN-823N v2 usb dongle (Bus 001 Device 005: ID 2357:0109 from lsusb) in NVIDIA Jetson Nano (stock image, Ubuntu 18.04.3 LTS). I have followed the instructions in the …