-
Configure PWM channels through ALT function specification on a device tree overlay.
The driver should be loaded on boot.
-
I'm a bit of a nix noob I must admit, but I was trying to configure the Raspberry Pi PoE hat so that the thermal trips are a little more sane. Typically this is done with the following in `/boot/firm…
-
### Describe the bug
Booting a Raspberry Pi Compute Module 4 with `boot.kernelPackages = pkgs.linuxPackages_rpi4` is not possible. Booting freezes at "Starting kernel ..." and does not progress, no o…
-
I'm struggle-ing but willing to find out how to make a rpigpio setup for this board.
any way forward to map de UART RS485 and CAN port of this board.
I have found de pdf with pinout on you're side…
-
Hi,
I am using the Radxa 3W 22.04 server image from here: https://joshua-riek.github.io/ubuntu-rockchip-download/boards/radxa-zero3.html
I can see the port with i2cdetect -y 3 but my device is n…
-
Can the device tree overlay and driver for the Microchip ENC28J60 be added to the Radxa Zero image?
On pins 19, 21, 22, 23, 24
-
Hi,
I'm pretty sure that RemovePackages should not be part of the device tree, but part of the vendor_watch tree. This is because it removes packages that are common to AOSP, not to the device. If …
penn5 updated
5 years ago
-
roc-rk3588s-pc has an m.2 interface which both support SATA and PCIe. But it has to modify in dts and recomplie the firmware . Can we support nvme through dtbo overlay or something that don't need co…
-
I'm trying to make the Waveshare 10.1" LCD DSI to work on Rock 4B+ by porting the driver from Raspberry 6.1 kernel. I modified the code and the modules builds and loads properly. The image on LCD appe…
-
I'd like to avoid too many customizations for things like the PocketBeagle Grove Kit. If we enabled cape overlays for PocketBeagle, the device tree overlay can be enabled without changing the image. S…