-
When using the built in USB DFU bootloader, lets auto-reset into the bootloader mode from USB Serial using something like 1200-baud knocking
-
Depending on the `match_op_t`, `dfu_impl_t::select` can be called many times in `dfu_traverser_t::schedule`: https://github.com/flux-framework/flux-sched/blob/a9c1bd5d4d9058d148bf5b5cc6a737c28dc1ce4a/…
-
Hello,
I cannot get my unit to go into DFU mode. I checked all my connections and I just can't get it to go. I shorted J1 and BOOT0 to 3.3v.
I also checked continuity between my usb pins and the…
-
I have a 446 and I can get it into DFU mode no worries. (BOOT0 is fine)
It flashes klipper and reboots into it fine.
But if I remove the boot0 jumper, it just doesn't work.
```
make flash …
-
implement a new sdmux/ class to support programming of the target boot device using the DFU protocol implemented in e.g. u-boot
-
### Category
Other
### Hardware
Other
### Firmware Version
2.5.0.d6dac17
### Description
A long press and "Shutting down" on the Heltec T110 put it into an approx 18 uA drawing sleep.
A press …
-
Could you please add the detailed DFU documentation? :-)
In the 0.8.4 I've found code with channel_map, is this move towards multi-channel DFU / Mesh?
Thank you
olsky updated
8 years ago
-
Hi. Been trying to figure out why I keep encountering "Error: Failed to run wInd3x exploit: string descriptor got unexpected result, wanted 'haxed dfu', got 'USB DFU Device.'" Whenever I try to run th…
-
**getestete Version**
Calliope mini App 2.0.0
**getestet mit folgenden Calliope mini**
Das Problem tritt bei Calliope Mini der Version 1.3 als auch 2.1 auf.
**Eingrenzung**
Android-Version > …
-
Great job on the Firmware for the smartwatch!
More of a question than an issue: Which program on the smartphone did you use to upload firmware? I tried Nordic's "nRF Toolbox" as well as "nRF Connect"…