-
Is it a stupid idea to use the Adafruit_NeoPixel library instead of FastLed?
I tried to do so, but I failed:
**PiconZero08n.ino**
```
//////////////////////////////////////////////////
//
// P…
-
The dstemp extension does not work on the micro:bit V2. It returns an error code 3 "Read Timeout".
-
`The DS18X20 B7 chip die (found in the DS18B20, DS1820S, and DS1822 products) can experience EEPROM data corruption failures during power on reset.`
`Since the EEPROM holds internal trim values (in…
-
I need some library for OneWire and DS18B20 which is supported in Arduino.
Here are some information
https://www.pjrc.com/teensy/td_libs_OneWire.html
https://github.com/milesburton/Arduino-T…
-
### Description
The compiling of the OneWire libary with the pre-released ESP32 core version 3.0.0-alpha3 throws an errorwhile compiling the DS18x20_Temperature example.
### Steps To Reprodu…
-
Hi Tijmen,
Ik ben al een tijdje bezig met het candle smart home systeem. Helaas loop ik stuk op de foutmelding ! NOT CONNECTED TO GATEWAY wanneer ik een thing toevoeg na het toevoegen van de candle…
-
Candle Manager installed correctly.
Candle Receiver installed correctly.
Up to there everything works OK.
Created a "temperature and more" device.
When installing the new device, the process sto…
-
Hello,
I built up two of the tinnymodbus. Flashing over modbus works fine. I can also read out the internal voltage (0x03 0x0003), the internal temperature is too high.
I tested with a DS18S20 and …
Fux2 updated
8 months ago
-
I am using an RP2040 with arduino pico sdk (not MBED).
The problem is that if I use oneWireNg (PIO version) I can’t instantiate more than 2 onewire connections. If I try to use more than 2 of them t…
-
### PROBLEM DESCRIPTION
DS18x20 does not work out of the box using parasitic power. Looking at the source, a critical line of code seems to have been commented out.
### REQUESTED INFORMAT…
wrlaw updated
6 months ago