-
I was wondering whether it is a good idea to extract the objects into an assembly file for each object and include them where they were extracted from in s2.asm, like what was done in the Sonic 1 disa…
-
Compiling by hand following [https://wiki.volkszaehler.org/software/controller/vzlogger/installation_cpp-version](https://wiki.volkszaehler.org/software/controller/vzlogger/installation_cpp-version) V…
-
Hello!
Would it be possible to also read meters with OMS protocol? (https://en.wikipedia.org/wiki/Open_metering_system)
Specifically OMS 3.0.1 Standard Mode 5 with AES encryption
that would be pe…
-
いろいろ鑑みてCentOS7.9がいいかな?
- https://barecare.jp/blog/2021/06/29/42/
-
Hi !
Since 2021.8.0, a new [Home Energy management](https://www.home-assistant.io/blog/2021/08/04/home-energy-management/) has been added to HA.
[Utility Meter](https://www.home-assistant.io/in…
-
Hi,
Rotated seismograms (`NE->RT`) produced using `obspy` and `SAC` were different for some stations. I noticed that in my data component azimuths do not always reflect the station name. In the exa…
-
Moin,
i have some problems, I use Homeassistant and push/public the Gridinformation to Venus.
My problem is that the Dbus-Mqtt-grid doesnt connect to my mosquito broker.
2024-08-05 23:00:34: New…
-
Look at lines 54, 59, 64 in this file.
[main.cpp](https://github.com/anyshake/explorer/blob/master/firmware/src/main.cpp#L71)
This is line 54, I'll paste it down here.
`packet.EHZ[i] = EHZ.data >> …
-
### Is your feature request related to a problem? Please describe.
is it possible to configure the netprofile over opendtu, to AT (like described here: https://e4mobility.at/blog/hoymiles-netzprofil-…
-
I have downloaded data directly from WILBER Iris service and in Pysep to double check all data that should be available can be streamed. Unfortunately, some traces downloaded from WILBER are segmented…