-
Hello, as the title says, I managed to brick a WB3S module. I wanted to erase it completely, selected the advanced options, and erased it all, including the RF section. I noticed that successive flash…
-
This is less of an issue and more of a hardware revision.
I have been working on a version of the PCB that is almost fully turn-key,
The fully assembled PCB can be ordered from JLCPCB, PCBway, etc…
-
### Basic Infos
- [x] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [x] I have read the documentation at [readthedocs](https://arduin…
-
### Basic Infos
- [x] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [x] I have read the documentation at [readthedocs](https://arduin…
-
### The problem
`stop_action` is not being called after `max_duration` on feedback cover with built-in endstops. The documentation states that the purpose of `max_duration` is protecting from dysfunc…
-
Hey guys!
I have seen some posts and read some threads about this issue and I wanted to ask once and for all.
I understand this issue is mainly because wifi interrupts causing fastled to flicker t…
-
While preparing to add the RI line from the ESP12F to the userport I was decided to check that GPIO14 was transitioning with each ring. It was, however it happens so quickly that my logic probe barely…
-
Hi,
I've written an almost feature-complete program that you can upload to an ESP8266 to track it.
Just to take any doubts about the ESP actually being capable of tracking even though it has such …
-
Please write here the name of your boiler and its compatibility features (what works, what doesn’t work).
I will add to the table in README.
This will be very useful for other people. Thanks!
*…
-
MQTT connects for a while but when it disconnects, it shows `failed, rc=-2` error (Error code rc-2 is caused by a network error between the device and MQTT broker). When I comment ws2812fx.service(); …