-
L.S.,
Recently received a new batch of Sonoff Basic switches. Had a tough time flashing them with ESPEasy.
Found out by accident Sonoff changed the design (yet again) and used ESP8285 on this batc…
-
FYI:
After adding the HSV slider to easyfetch i tested it today.
I realized, that the color is always a little bit off (especially in the yellow/orange section).
So i compared it with Tasmota since…
-
Greetings,
i recently added a new usb to ttl device to my collection. When plugged in, windows device manager tells me it is recognized and sees it as com10.
i can use it with putty and the likes …
-
With P2P enabled, I get time drift. (at least 15 seconds)
NTP only works as expected.
Only disabling P2P fixes the problem.
Regards Klaus
-
So I bought one of these nifty little breakouts and am currently using it in the office.
My problem now is that the temperature always comes back as something above 26°C, even when the windows are …
-
Hi
I'm using a ESP-C3 to add Environment sensors and started with connecting a DHT11.
I can see that it's in the list of supported sensors
https://github.com/Joolee/nl.joolee.homey.espeasy/blo…
-
I tried the web flash tool on a Lilygo ESP32 4Mo and on a Wemos Mini32 V1.0.0. flashing ESP_Easy_mega_20221224_normal_ESP32_4M316k.factory
The Esp32 are well flashed and I can see the log of the oper…
-
I recently changed all my nodes to LittleFS as it results in smaller binaries (especially handy for 1M builds). Now the problem is, that the 2-step uploader binary included with ESPEasy can't read the…
-
Na join, krijg ik geen network id of device address (en wederkerend connect failures in de log). Je kunt waarschijnlijk zien dat ik de duco weer opnieuw heb gestart en ik toch nog maar een keer op joi…
-
Hello.
For what I know currently ESPEasy supports only one I²C master bus.
In fact in the Hardware tab we can specify the GPIO pins to assign to the I²C master bus:
![image](https://user-images.git…