-
On the page
https://github.com/ExpressLRS/ExpressLRS-Hardware/tree/master/PCB/2400MHz/TX_SX1280
after reading everything, I noticed that there is 2 PCB design, and no hint about which one to choos…
-
## Current Behavior
My ELRS Receiver that was working in Betaflight doesn't work in INav.
## Steps to Reproduce
flight controller: [NeutronRC AT32F435 Mini AIO V1.2](https://www.aliexpress.com/…
-
In https://github.com/raul-ortega/u360gts/blob/master/docs/hardware-frame.md a mechanical design from Juan Trillo is referenced, involving a symmetrical 2-tilt-servo setup. That takes care for the oth…
-
This awesome and super happy to see you are working on this library. I'm planning to try it out for a combat robot (like Battle bots). Do you have plans for implementing telemetry and/or would you acc…
-
Script is reporting Bandit installed firmware as 3.0.0 but is indeed 3.3.1.
-
## Current Behavior
I have my Radiomaster RP1 2.4 GHz module connected to betaflight 4.5. When no ELRS connection is present, I sometimes see the RSSI value jump from 0 to 1022.
## Your Enviro…
-
## Problem description
Due to the stringent regulatory measures on the Chinese internet, it's common to access GitHub locally using a self-signed CA certificate for reverse proxy. This approach all…
-
## Current Behavior
Lua script V3 on my unmodded QX7 does not load at 115200 and loads very very slow on 400k. Works on 3.3.x, but not on 3.4.x. Similar to issue #2010.
## Steps to Reproduce
…
-
add code to backpack selections for using an Happymodel EP82 backpack module to add option for control of two RX5808 modules by adding a 2nd CS output. An example would be an Eachine Pro58 Diversity m…
-
I just put STM32F745 BF 4.2.8 on my long range 7in. On the bench I am getting a Link Quality warning. I am using the crossfire hack to have LQ sent through a spare channel and using the RSSI element i…