-
### Bambu Studio Version
1.7.7.89
### Where is the application from?
Bambu Lab github releases
### OS version
Windows 10 9x64)
### Additional system information
N/A
### Printer
x1 carbon
###…
-
The PID controlled temperature has an output which should strongly correlate with the amount of heating necessary to keep the correct melting point. And the amount of heat necessary should correlate …
-
NFC stickers are widely available for cheap, I would like to be able to stick these to any kind of spool and then have the printer safe changed settings (filament type, color, and temperature etc.) to…
-
### Version
1.41.0+win64
### Operating system type + version
Windows 10 Pro, Version 1803, build 17134.345
### Behavior
When using multiple materials with the MMU, at filament-change, the new…
-
When paused my extruder temps are set to 0 but only actually cool to 23-28C depending on ambient conditions. To avoid unwanted erroneous messages I have to set the thermal runaway warning to look for …
-
filament is not moving and this plugin didnt catch that!
in pictures are my settings. In test is all OK, detection works, no issues...
but during printing, distance is not measured properly + moveme…
-
When I add the following to the klipper printer.cfg:
[filament_motion_sensor encoder_sensor]
detection_length: 7
# The minimum length of filament pulled through the sensor to trigger
# a sta…
-
In some cases, the built in collision detection that gets used when printing sequential objects rejects prints that would actually print fine.
One simple example is a set of very short (~2-3mm) con…
-
Issue: I use MMU with endless spool on. This means the clog detection must be turned on. In general it works great, But there is always a false positive with priming line and in general with first lay…
-
### What happened?
Just compared the avaliable/shown settings of version 2.3.57.10 running on WIndows10 with the list avaliable on https://github.com/supermerill/SuperSlicer/wiki/Macro-&-Variable-lis…
hagre updated
2 years ago