-
I get different values of signal strength when I run from command line and different with rigctl cli
Example:
dimitris@dimitris:~ radio$ rigctl -m 2 -r localhost l STRENGTH
16
dimitris@dimitris:~…
-
Add a simple QR barcode encoder that dumps all the flash/EEPROM settings to a 2D barcode on the screen, which can be captured and converted back to a human-readable settings list. The capture-and-con…
-
hi there here are some hidden CAT commands i thought you may find useful in the future...
please excuse me i do not know how to add the enhancement label above.
?{ 0, { 0x00, 0x00, 0x00, 0x00, 0…
-
I would like an input for Intermediate Frequency setting.
Example : rtl-sdr will listen all the time in IF frequency of my FT-857 68.33Mhz even if I change the display frequency to 7.020 Mhz.
All ne…
-
I am currently working on getting the USB AUDIO support going. Goal is to provide audio in and audio out via the standard usb. At first this will not be coupled with CAT to keep CAT mode working as is…
-
I'm looking into cat_driver.c and CatDriver_HandleProtocol()
This looks like a bug:
The "CatDriver_InterfaceBufferPutData(resp,bc);" should be placed
inside the "while (CatDriver_InterfaceBuf…
-
In looking at the keying envelope on a separate receiver, I see that there is no shaping on the leading or trailing edges. This is generally not a good idea, as it creates additional sidebands and an…
kb1vc updated
6 years ago
-
Running V1.05 L and then in the same room ran a test "flatsat" of Fox-1D (i.e. it has an old Tx on the Fox-1a frequency, no HERCI, not camera installed but does have Fox-1D software).
FoxTelem appe…
-
Is it possible to transfer some static variables from the usb stick in to the mchf during firmware upgrade?
( for example reading a file at the usb-stick, - "static.txt" , containing Call=callsign)…
-
Hallo, after SOTA & OMFF activation with mchf trx powered from 3S LiPo Battery i have idea for LOW BATTERY warning (configurable voltage level with some delay, sound or text on LCD) and switch off at …