-
.pio/libdeps/fysetc_e4/ESP3DLib/src/sd_ESP32.cpp:324:30: error: 'class CardReader' has no member named 'diskIODriver'
Latest master branch have build problem caused by dependency change
-
There is a library to read sd cards but there is no library to "become" sd card to other hardware
(via small pcb adapter inserted into sd card slot of other hardware and connected to circuitpytho…
arekm updated
2 years ago
-
**Printer type** - MINI
**Printer firmware version** - original
**Original or Custom firmware** - 5.1.0 alpha
**Optional upgrades** - Filament Runout Sensor
**USB drive or USB/Octoprint**…
-
Would it be possible to add a custom flash command for those of us who have non-compliant boards. I have a Fysetc Cheetah. I was thinking it could be a config option somewhere.
Thanks!
-
There is a problem in the [readme.md](https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V1.0) for the point:
_After opening the project, go to the platformio.ini file and c…
-
Do you know how to make the Fysetc Mini 12864 to work with the TH3D-EZBOARD LITE using their unified firmware?
-
Hello,
I'm using an ebb36 toolhead connected to the can0 interface.
It's not possible to complete a print using the catalyst can0 interface at 1M bit rate.
After 10 minutes of printing klippe…
-
I'm attempting to switch a fan on the fystec sb toolhead to 5v via JP1 or JP2, but I can't determine what I need to solder or cut.
I see three pads in the jumper, and none of them appear connected…
-
I am running the S6 board with the Fysetc TMC2209 drivers and every time I enable TMC_DEBUG in configuration_adv.h and upload the firmware to the board, I do not get serial communication from the USB …
-
My LED strip is connected on my FYSETC, so it would be cool to control that one...
Of course, animations are hard there, but well, they are not that important.
Thanks!