-
Recently I received a Bosch Supraeco STE 80-1 heatpump connected via the MB LAN 2 interface, but the Bosch EasyRemote-App is very limited to monitor the status of the heatpump. Have users been success…
-
I've got an Ochsner GMLW 19 with TEM-Controller connected to with john's ebus adapter.
ebusctl find:
.
address 15: slave #2, scanned "MF=TEM;ID=24849;SW=0604;HW=0102"
.
I'm using 15.24849.HW01…
-
I am running heat-pump which configured to be controlled by compensating outlet temperature by outdoor condition's.
As for end user it's allows to shift current set-point by -5 / +5 degrees.
It wou…
-
Hello, I bought the following heat pump for my Pool. You can control it with the Tuya/Smart Life App. Do you think Tuya Converter will work with it? I have fear to test ist an can never go back... bec…
-
Hello,
this may be a general CAN question, but I want to send requests to my heatpump in order to obtain data : like outside temperature for example.
1st try ; I just "read" to the Bus and wait …
-
Hi!
Trying your emulator. Installed latest `sbt` from https://www.scala-sbt.org/download (v1.10.0).
Getting the following error:
```
C:\Programs\mitsubishi_heatpump_emulator-master>sbt run S…
-
Our Daikin heatpump has two relays for smart grid connectivity.
I am not sure if this is even within the protocol, but could this project support the smart grid features as well?
-
**What kind of device or service you would like to see an adapter for?**
For Elco Aerotop Split heat pumps there is a gateway (Remocon Net Gateway). The gateway enables data readout and control of th…
-
When I change the temperature via the climate.heatpump, it does not change in the end and it remains at the read value.
-
### The problem
**Bug Description for Nibe F1255**
When attempting to configure the Nibe heat pump, a validation error occurs. The error happens during the connectivity check and results in a Fiel…
Puma7 updated
2 weeks ago