-
the ifcfg files are bash scripts, using variables in the values of previously existing varaibles might just work; but orderingis very impoartant
-
Click Network→Network Configuration → Delete
error message : Delete interface enccw0.0.1000 failed !GINNET0015E: Error getting information from ifcfg file: 'Error during match procedure!'.
-
```
root@calleva:~/rtl8821CU# grep -lr . | xargs sed -i '' -e '/ifcfg-wlan0/!s/wlan0/wlx00e02d2b29d3/g'
sed: can't read : No such file or directory
root@calleva:~/rtl8821CU#
```
-
https://wangjie-star.github.io/CentOS-7%E8%AE%BE%E7%BD%AE%E9%9D%99%E6%80%81IP-302c5f2d176a/?
vim /etc/sysconfig/network-scripts/ifcfg-ens33 12345678910111213141516171819202122TYPE=EthernetPROXY_MET…
-
### Description of the problem
The adapter works fine on an ioSafe N2 which has been retrofitted with a DS218+ PCB. The only "issue" I have is, as it seems, that the the adapter won't come up at bo…
-
Currently, the network service only refreshes if the ifcfg file changes. If an interface (e.g. a VIP) is configured but not up, the module does not bring up the interface.
It should be possible to…
-
I have a interface named "wg0_BSSIntranet"
this is listed via ifconfig but not from ifcfg
I assume the '_' might be the problem but from linux side it is a valid interface caracter ...
-
ncm-network creates backup files of active configs, but they should not be considered as modified files as they are just temp files to rollback in case of a problem (`CAF::TempFileWriter`?)
-
with every run slave interfaces change
```
--- before: /etc/sysconfig/network-scripts/ifcfg-eth1
+++ after: dynamically generated
@@ -1,8 +1,8 @@
NAME="eth1"
DEVICE="eth1"
BOOTPROTO=none
ONBOOT=y…
-
On a fresh install of Raspberry PI openSUSE LEAP 15.3 (also tried Tumbleweed) I observed that using `yast` to configure the Wifi with a password containing an apostrophe (single quote) fails to connec…