-
Hi,
I have an overlay with chat and alerts on screen with streamelements and everything works in the rear cam, but when i change to the front cam the overlay is completely inverted and it's imposs…
-
### What happened?
(in English see below)
Wenn der Inverter durch den dynamic power limiter abgeschaltet wird, bleibt das letzte Limitwert bestehen. Das führt dazu, dass beim Wiedereinschalten de…
-
Hi,
My Sungrow Hybrid inverter works like a charm, thanks for that! 😊 I also tested adding my string inverter and I seem to get the information about solar power production at least, my question is…
-
Goedemorgen Edwin,
Na het bouwen van de flows op basis van Power Reduce Limit gaat de [set] Limit
na 2 minuten terug naar 100% , de Active Power Limit kan ik niet meer wijzigen.
Klopt dit? m…
-
[appsyaml.pdf](https://github.com/user-attachments/files/15937021/appsyaml.pdf)
**Describe the bug**
A clear and concise description of what the bug is.
everything is working but the …
-
I understand that the automations read the time settings from the inverter to the time data in those tabs and vice versa.
This assumes the values from the inverter are of type `number`. As I'm usin…
-
# Log Message
```
Device matches hama_radiator_controller with quality of 30%. DPS: {"updated_at": 1716038851.0550244, "2": 111, "10": 132015, "15": "WVC-1600", "16": "A8.2023.0705", "17": "…
-
I have a question regarding the general protocol: How long does sending a request to the inverter take (in milliseconds)? For how long does the inverter send back its information (in milliseconds)?
…
-
Some basic parameter control will be added:
- [ ] Power on/off
- [ ] SOC bottom limit
- [ ] Inverter operating mode
- [ ] Anti-backflow function on/off
- [ ] Unbalanced output on/off
-
Hi I have lilygo T-CAN 485 connected to my inverter Deye. It works very well.
Now I made seccond battery with jk BMS and I want to integrate it with Home Assistant.
JK BMS can connect with my phon…