-
The Remeha boilers (and other brands too) can send fault and parameter codes to the thermostat. It is done by using the Transparent Slave Parameters. Only Thermostats of the same brand know which fau…
-
**Describe the bug**
SInce a certain release of either ithowifi or HA (sorry, not sure which triggered it) I receive MQTT warnings about 'low' or 'high' modes not being a valid preset mode
**To Re…
-
**Describe the bug**
After installing the CVE add-on I cannot seem to get the I2C connection to work.
On the ltho status page: `Itho I2C connection status: init failed - please power cycle the Itho …
-
My startup code looks like this
```c++
esp_err_t ret = nvs_flash_init();
if (ret == ESP_ERR_NVS_NO_FREE_PAGES) {
ret = nvs_flash_erase();
ESP_LOGE(TAG, "nvs_flash_erase: %s", esp_err_to…
-
**Describe the bug**
I use Itho ECO 350 unit with no external temperature sensors and the `CVE Add-on`
I noticed that the unit started reporting `exhaust temp` as the `outdoor` temp (and `supply te…
-
Hi,
First of all, thanks for this project!!
#### Problem statement
1. update `api.html?vremotecmd=auto`
2. request `api.html?get=ithostatus`
3. the `fan-info` value in (2) is not updated imme…
-
Just to let you know, I just started a Python plugin to send commands to the Itho Wifi Controller as an easy integration option for Domoticz. Its currently only to push new commands to the module, not…
-
**Describe the bug**
I cannot seem to update the firmware version to a more recent one. Current firmware version is 2.5.6 but an update to 2.5.7 or the most recent stable version 2.8.0. won't seem to…
-
I have a max sensor based on the DSMR voltage sensor.
This is not available when HADailySensor is starting and thus gives an error.
`Logger: custom_components.daily.sensor
Source: custom_componen…
-
I have a 4th generation Itho WPU, with the MFT thermostat. This thermostat has the option to enable additional cooling for (by default) 48 hours. I've been considering using this option to enable cool…