-
**Is your feature request related to a problem? Please describe.**
I find that the current mechanism for graphing has too much friction. If I understand correctly, there is configuration on both cort…
-
First of all thank you for all this work, it's great.
I'm using vscode+cpptools+IAR extension to deveolp embedded device software.
Everything is working fine (with the already known limitation), but…
-
**Describe the bug**
- OS and Version: Windows/Linux (Version does not matter)
- VS Code Version: Does not matter.
- C/C++ Extension Version: UPSTREAM (0.21.0)
- Other extensions you installed (an…
-
Great work much appreciated.
----->>>>>comming to my issue I was able to flash this project
https://github.com/martin-ger/esp32_nat_router/blob/master/main/esp32_nat_router.c
---->>>> but your…
-
hi,
I connected the bms board to the jlink, but the bms needs to be powered on, how do I power onthe bms just for debugging using jlink?
I just connect the jlink to bms and see the following:
…
-
In the latest version of main, I am unable to debug using a j-link.
There is another unrelated issue of using newer versions of cortex debug in vscode.
 how you debug your boards at the moment? What software, debug probe, target do you use (for example `artix7_100t` board)?
-
**Is your enhancement proposal related to a problem? Please describe.**
Environments such as IDEs may want to call commands like `west flash` in order to allow users to perform common workflow task…
-
### Describe the bug
When debugging the H7RF, and other targets, a debugger session with GDB is started, this debugger session loads the symbols from the .ELF file generated by BF as part of the ta…
-
There's a second issue that I discovered yesterday with the same old JLink-OB clone probes.
Although probe is detected correctly after connection, it fails to work and reports the lack of response …