-
From @askn37 here.
* https://github.com/avrdudes/avrdude/discussions/1654#discussioncomment-10411448
@stefanrueger
> @MCUdude @askn37 @mcuee I still don't know what to do about the curiosity n…
mcuee updated
3 months ago
-
Any chance you would consider adding a board variant for the AVR128DA48 to match Arduino Nano Every pinout? I would like to use this chip as an anternative to the 4809/Nano Every on an existing projec…
-
Great work - purchased from your Tindie store, and using for my DeepSleepr project!
Oddly though, in MP Lab X the kit comes up as having a ATmega4809 connected - it's actually on an Attiny414.
…
-
 libreadline status**
As of now, for auto-tools build, the presence of libreadline is not correct. It always says libreadline is not present even though libreadline is present and the final binar…
mcuee updated
3 months ago
-
Hello Mr. Tillaart.
I remembered your good advice in august last year on how to distinguish between a MAX6675 and a MAX31855 mounted in a same circuit. Thank you again.
This time I come to you w…
-
There are some suggestions from @askn37 to improve jtag2updi. He has also patched FW for his jtag2updi implementation.
mcuee updated
9 months ago
-
The new AVR-DA series (ie AVR128DA48) has a significantly different NVM controller from the Mega0/XTiny chips. (Sigh.) Since flash programming is done by writing the appropriate commands to the NVM …
-
Based on a [comment](https://github.com/avrdudes/avrdude/issues/1649#issuecomment-1925568611) my @askn37 and [test](https://github.com/avrdudes/avrdude/issues/1649#issuecomment-1925554595) by @mcuee. …
-
I have been trying to burn a bootloader into an ATtiny3217 for quite some time now. It does not work. With an unprogrammed, new ATtiny3217, I can burn the bootloader, without an error message, but it …