-
Due to recent changes in kicad-myparts, a few of my older projects required modifications too. These changes to kicad-myparts were clearly good and welcome, but at the same time, they are generating a…
-
I have 8 hieratical sheets, contains some uniqe symbols and one 8-parts symbol (J1)
![sch1](https://user-images.githubusercontent.com/2323320/194751266-f92b6fd9-bf71-453d-a97c-32faab030ec3.png)
![sc…
-
When opening the schematics, all the custom symbols are replaced by big squares labelled with "??".
⇒ either keep the library folder where it is and add the custom symbol libraries into the pr…
-
Hi Lachlan,
Most of my boards are using via stitching for GND planes. This causes a lot of ugly GND VPDEV0 devices to be added to the schematics.
It looks like it is possible to have via stitchi…
-
It will be good to rearrange components and make schematics more readable. Then it will be more appealing to the people, and it can be used as documentation. If you have some notes about the schematic…
-
The schematic and pcb in this repo do not match the CANBedDual available on https://www.longan-labs.cc/1030019.html or https://www.seeedstudio.com/CANBed-DUAL-RP2040-based-Arduino-CAN-Bus-dev-board-2-…
-
It's already noted in the hardware readmme that schematics are absent. Could be solved. I'm starting a KiCAD schematic on my fork, but consider myself by no means an expert. Help is welcome
-
I have been trying to convert [this open source project](https://github.com/foxBMS/foxbms/blob/master/hardware/hw-slave-18-ltc6813-1/hw-slave-18-ltc6813-1.zip) to KiCad from Altium. When converting, i…
-
## Forward (thanks!)
The digikey-kicad-library is proving to be a very useful resource in my design process; it's definitely accomplishing Digi-Key's goal of roping more engineers into using Digi-Key…
-
KiCAD, at least on Linux, is fully UTF-8 compliant. So, in my existing KiCAD schematics I use strings like '4.99Ω' and '0.1μF' as values. Such strings seem to create problems to 'bomsaway.py', which…