-
Repeated the grbl_esp 32_cnc_controller v1.2.1 Board. I Use a CNC engraver with the ability to connect a milling cutter and a laser. When using the relay to switch the router in the firmware we use pi…
-
Hello. I made this code work. But it's been twice that I have a mistake. It loses the connection due to one error or another. And when it loses the connection the laser stays on. Which pierced my 12mm…
-
I got a new laser engraver with the table of recommended power/speed/materials. What would be the next steps to get them added?
I would like to get them added.
Putting them in manually every tim…
-
Context
-------
Notre laser
Wavelength 400-460nm
class IV laser product
this product is comply with 21 cfr
![img_2666](https://user-images.githubusercontent.com/31619215/44545832-65923580-a71…
-
Hi All,
I have connected my CNC to Arduino and laser (to make it a laser engraver :) ). Anyway the problem I have is when I start the program it automatically reports Hard limit pressed and that's …
-
I downloaded this extension and ran it in Inkscape and tried implementing it into my laser engraver, but found out it wouldn't identify it because it outputted as a .txt file instead of a .gcode file.…
-
LaserGRBL's display (top-right of image display area) of X and Y position is always 0, regardless of where I jog the head (or move it with G0...).
**To Reproduce**
Home the engraver head, make thi…
-
Trying to send to a Wainlux K6 on COM3. I’ve not been able to send a simple pattern the the engraver; it errors out with the above message. I was able to get it to trace the bounding box once by runni…
-
Hi!
It's not really an issue, it's rather a feature request.
I'm trying to make a printed circuit board using a Chinese DIY laser engraver and LaserGRBL. First, a thin coat of paint is sprayed o…
-
Hello, i was wondering how would i go about connecting **Relay** to the board in a way that would Turn on at the same time as laser engraver.
In the past i tried connecting standard relay to the t…