-
### What happened?
I recently updated to the newest version of WLED beta release 0.14.0-b3. I am trying to use the 2D matrix setup for 24 8x32 led matrix panels. It will allow me to setup the 24 scre…
-
Can't connect my Nanoleaf Light Panels, it finds it from the "Searching for devices..." window, I select it and I try to connect, but it only says to "Press the power button on your device for 5-7 sec…
ghost updated
5 months ago
-
Hi,
Has anyone encountered horizontal flickering (literally horizontal lines going across the screen) on a chain of panels every 20 seconds or so? If so, then how did you resolve the problem?
I …
-
I am using a single chain of led panels ( 2 of 32x32) and would like to interface with an arduino over serial. Given that I am not using the e address line nor any panels on chain 2, will TX and RX pi…
-
If anybody is interested in ordering a MicroMatrix please let me know (by responding to this message).
It seems the most efficient way is to order pre-assembled PCBs from somebody like JLCPCB in Ch…
-
panel type: P2.5 FM6127 64 * 64
bonnet: https://www.electrodragon.com/product/rgb-matrix-panel-drive-board-raspberry-pi/
First of all, I would also like to thank you for all the work and the much …
-
There wasn't any other place to put this. So here it is. I'm running your amazing code on 25 Led Matix panels, raspberry pi 4 (4gb) with a adifruit led matrix hat, . Just want to share, and say thank…
-
I have problem to display lower part of LED P4 outdoor panels (64X32 Pixels, 1R1PG1GB SMD 1921, 1/8 scan, refresh frequency >=400Hz, www.led-card.com) with my AdafruitHAT and RPI 3B+.
I have for the …
-
This looks promising:
https://www.digikey.com/product-detail/en/bivar-inc/SM0603UV-395/492-1949-1-ND/5030564
If I create a square grid, maybe I could do like 25 LEDs per panel...
The idea would…
-
Hello !
I am currently using a Raspberry Pi Zero W V1.1. I am using it just to test things out until I get my hands on a Raspberry Pi 2 or 3.
I am using 64x32 1/8 Outdoor SMD P5 2727 LED Panels.…