-
Hello sittner
Thank you for your work
I installed your driver using deb http://repo.modusoft.de/linuxcnc/wheezy ./
My problem is running the program using `loadrt lcec` in the hal file.
I getting…
ilyaq updated
6 years ago
-
**Issue by [luminize](https://github.com/luminize)**
_Mon May 19 06:42:37 2014_
_Originally opened as https://github.com/machinekit/machinekit/issues/193_
----
In these two thread is some discussio…
-
Hi
I just saw your video https://yewtu.be/watch?v=Bqa2grG0XtA on using screen glasses to display information from LinuxCNC and a high speed camera. It occured to me that such applications might be…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Problem description
**Describe the problem and how it impacts user experience, workflow, maintainability or sp…
-
## Here are the steps I follow to reproduce the issue:
1. Install Linuxcnc
2. Open any Linuxcnc configuration.
3. Load a tool offset using G43Hn, where "n" is not equal to the loaded tool num…
-
Hi,
First of all, thank you so much for this component!
I have started seting up linuxcnc + ethercat after watching the video of MetalMusings: https://www.youtube.com/watch?v=NQ-HnrusGJo
He des…
-
I would like to dedicate this issue to tracking progress, ideas and problems with porting (and running) LinuxCNC@master atop the Machinekit-HAL@master. This discussion was already partially broached i…
cerna updated
2 years ago
-
For example, there are a lot of files under `bin/Debug` and 'obj/Debug', those files such as `.o` files are generated when compiling.
Also, I see there is a layout file, this file is also try to re…
-
1. Put a part in the machine, zero to center.
2. Run file/job
3. Load another file
4. Run other job on the same part.
Once you will do this you will notice a offset happens, I had this happen on…
-
`halshow` is not useable because it needs `halshow.tcl`, `linuxcnc.tcl` and `linuxcnc.so`:
https://github.com/machinekit/machinekit-hal/blob/fc6e92b44bd224a1c27f1f4341907c1054286e80/src/Makefile#L565…