-
Hello All,
I am trying to create a gateway using grove - lora radio 868 and Raspberry pi. My assumption is for gateway to receive packets it needs receiver, so below would be my setup:
Grove L…
-
This issue is for collecting information about LoRaWAN and implementations from [Congduc Pham's Gateway](https://github.com/CongducPham/LowCostLoRaGw/tree/master/gw_full_latest).
# Single-Channel …
-
Hello!
First of all thank you for your code and tutorials, there are really helpful.
I am using a RPI 3 for the gateway and an arduino uno for the end device. The module is inAir9. I have follow t…
-
Hi
Although my time zone is set to GMT +2, the MongoDB saves the values in Zulu time or GMT
```
pi@iot-gateway01:~/lora_gateway/sensors_in_raspi $ date
Wed 24 Mar 09:01:21 SAST 2021
pi@iot-gatewa…
-
I just followed the tutorial of the pdf file and compiled the `lora_gateway` on my RPi after cloning this repo.
Unfortunately `sudo ./lora_gateway` does not show anything on the terminal.
Is there a…
-
I am using a flora on omentpp for LoRa communication. The problem I'm facing here like i want to a pass message to the cloud server from two different loRa gateways through single gwrouter. When i est…
-
Hello,
Lora gateway, network server , node-red and MQTT broker are all on the same raspberry-pi based Lora Gateway.
the version of the network server is : 0.5.5
testing MQTT pub-broker-sub on…
-
Dear Prof. Congduc Pham
I'm very glad to find about your research in Low Cost LoRa Gateway. I'm Roni from Indonesia. I'm Post Graduate student in Politeknik Negeri Semarang. I'm very interesting ab…
-
It would be great if we could also use the lora board to connect to winlink on android via WOAD.
thank you
-
Hello saramonteiro,
Hope you are doing great. I need some information regarding your project like which Lora module you used and its frequency. I am using ESP32 Devkit V1 and Lora RA-02 modules. Is …