-
I'm currently trying to port https://github.com/OpenLightingProject/rp2040-dmxsun to the Pico-W. of course with the plan to enable the WiFi interface as well.
At the moment, lwIP is already in use wi…
-
Hey,
I'm really happy I've stumbled on this project. I want to use an ESP8266 to send/receive raw ethernet frames. There's currently the esp-raw project, it hacks about with lwip's netconn object t…
-
### Question
ESP_IDF v 5.1.3
chip ESP32C6 8MB SPI flash
I'm trying to add zigbee function to project.
It works only if wifi isn't connected to AP, else app crashes in ssl task when it starts t…
-
### The problem
I seem to be getting a compile error when trying to enable the "remote_receiver:" option in the yaml config using the RP2040 platform.
`remote_receiver:`
` pin: GPIO20`
` dump: a…
-
Board: ESP32-S3-WROOM-1
Arduino-ESP32: v4.4.1-1-gb8050b365e
After a day or so of TCP requests (sending temperature and getting temperature as a response) every ~10 minutes I get a "Guru Meditatio…
-
LiteX is using a custom Ethernet MAC from LiteEth and that is probably no compatible with any Linux Ethernet drivers. Driver are already there for the LiteX BIOS, some RTOS (NuttX) some TCP/IP stacks …
-
Hello, I came across your work yesterday. It's extremely interesting. I myself was looking to implement WebSockets on Pico.
I wrote this library for Pico :
[https://github.com/holysnippet/pico_eth…
-
### Board
ESP32 Dev Module Breakout Board (aliexpress version)
### Device Description
I have an ESP32 Wroom Breakout Board and Ethernet Module with W5500 IC connected trough SPI and CS pin attached…
-
When Ethernet full-duplex communication is performed (especially at high rates - over 1Gb Ethernet), it is noticed that Tx side of communication becomes the dominant one and completely "kills" the Rx …
-
**Issue by [clm6rt](https://github.com/clm6rt)**
_Wednesday Sep 25, 2019 at 11:12 GMT_
_Originally opened as https://github.com/Bosch-AE-SW/cddk-oss/issues/283_
----
Have IVAS as a new supported HW…