-
I am trying to follow this tutorial: https://www.arducam.com/docs/cameras-for-raspberry-pi/synchronized-stereo-camera-hat/opencv-and-depth-map-on-arducam-stereo-camera-hat-tutorial/
I have a Raspi4…
-
Hi WeAct Support,
We recently purchased your N02 carrier board(s) for being used with the Jetson Orin NX module. We expect to use dual RPi cameras for our project. However, the first MIPI-CSI2 conn…
l4es updated
3 months ago
-
Using the configuration and demo file below, I'm able to capture frames from the camera, but they are green shaded when using color_mode = 0 or 3. Setting color_mode = 1 or 2 produces a red shaded ima…
-
I am geting "could not request pin 46" error when trying to use imx8mp-evk-tevs.dts from tn-imx_5.15.71_2.2.0-next branch. Also The camera plugged into CSI1 port is not detected.
[ 0.000000] Mac…
-
thanks for sharing us your work.
I understood that you use NVidia Nano Dev Kit with 2 cameras: Visible and Lepton 3.5.
Could you please share me information which visible camera you use and how to c…
-
RPi camera module of the first version is rather rarely available these days, instead the most common is RPi camera module v2, which uses a different sensor - IMX219. Please add the support for this c…
-
**HW: AGX Orin 64GB developer kit
SW: Jetpack 6.0**
I have followed the steps, and shown on below sequence. Do let me know if i do it wrongly.
```
git clone https://github.com/IntelRealSense/rea…
-
I cannot run camera 4k with provided Debian image. Pls help to fix it?
P.…
-
Hi @will127534 ,
thanks for cool project! I intend to use the sensor as well :-)
If you want I can upstream the sensors into the Kicad library so they could be used also by other projects.
I ma…
-
Jetson Orin Nano with VC IMX568 cam
# command output
- command: v4l2-ctl -d /dev/video0 --stream-mmap --stream-skip=1 --stream-count=1 --stream-to=file.raw
```
VIDIOC_REQBUFS returned -1 (Device o…