-
### Did you test the latest `bugfix-2.0.x` code?
No, but I will test it now!
### Bug Description
MKS_UI: Y axis movement loss / offset, does not occur with Marlin color UI
### Bug Timeline…
phcay updated
2 months ago
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Compiled form master
**Configuration.h**
```cpp
#define MOTHERBOARD BOARD_MKS_ROBIN_NANO…
-
Good mornign trying to figure how to setup M25 nad M600 with TFT_LVGL_UI_SPI, but never success.
Looks like it is only possible using Marlin UI.
Still no solution with mks_ui? I encourage you t…
-
He montado el doble extrusor en mi impresora Tevo Nereus. Tengo conectados los termistores y funcionan bien midiendo la temperatura de los dos extrusores.
Pero el problema lo tengo al conectar los…
-
Hi, the screen from the box not booting, I tried to refill all the firmware, configured according to the instructions, nothing helped. After loading it stops at the mks logo.
Connected to mks robi…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
When using MKS_UI (TFT_LVGL_UI) there are Y axis motion losses / offsets at random Z heights,…
phcay updated
3 months ago
-
I've spent hours working with FLSUN to fix the firmware for my custom QQ-S Pro with an MKS Robin Nano V3.1 and a TS35 V2.0.
I have the Homing fixed except, if I offset any axis by a small amount ma…
-
I have tried everything but always not working properly on marlin 2.0.x bugfix and Mks-Robin-Nano-Marlin2.0-Firmware-master
when power outage and power on again choise for resume print or stop print …
-
I have tried anything but always not working properly on marlin 2.0.9.1. When power outage occure Z axis not lift up. This caused failed on when power on again. Please MKS help fix this trouble. Than…
-
The SD file transfer does not work neither USB nor Wifi.
After starting the transfer, _"No firmware response detected for sd card action. Assuming success and continue"_ message appears and the tempe…