-
Wifi not work in 1.0.3 and later
Always SSID = TP-LINK_MKS and Disconnected.
No reaction to config file.
No Wifi version in About.
-
It looks like it used to be in Chinese but the encoding is incorrect now.
https://github.com/makerbase-mks/MKS-WIFI/blob/master/firmware_source/MksWifi/MksWifi.ino#L83
I want to know what the di…
-
Hi,
I have 2 extruders and this problem:
if I add a printer in the MKS Cloud App 1.6.0 -> Equipment -> Local Printer, I can select 2 extruders, but if I save this Config, it will be 1 again. If I ad…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
WIFI with Repetier does not work, Proterface does not work, Cura very poor
### Bug Timeline
…
-
Greetings, I'm using a TFT70 and I tried many times setup "mks_config.txt" and I couldn't connect. I try with MKS WIFI TFT and MKS HLK-WIFI (I have both hardwares) and nothing. How I solve it?
I have…
-
Hi,
I understand that it is possible to plug in an ESP8266 WI-FI module (Makerbase MKS) to enable a WiFi connection,
Is it possible to make available a WiFi configuration file or function within th…
-
Since updating MKS Nano 35 in my Sapphire Pro printer the wifi is not working anymore, it was working fine with 1.0.2
-
Like many of you I spent the last few days trying to make sense of the TFT and WIFI from MKS. So I thought I'd pass on a few lessons I learned and hopefully help spare the next person hours of searchi…
DC3D1 updated
5 years ago
-
Hi, I'm using a Robin nano 1.2 motherboard with MKS wifi module and Marlin FW based on Makerbase release, and I can control the printer remotely with MKS Cloud app only in to LAN.
Where I can find th…
-
MKS TFT35 running your marlin and wifi plugin does not display preview images. After sending the print job from cura, a "G" appears in place of the print preview. Tested in Cura 4.7.1 and 4.8.
Har…