-
- [x] - Test sensor (MLX90614) with Arduino UNO board
DoD:
- [x] - Test of sensor completely
Blockers:
N/A
-
![want-you](https://user-images.githubusercontent.com/8080177/206915216-49011ad2-0374-492d-809c-3f5f94b9f100.png)
I would like to know how people are using this software. As I have developed a lot …
-
I am interested in adding device drivers for I2C-based devices, such as G-sensors (accelerometers), RTCs, and the BH1750 light sensor, within the NuttX operating system. I have noticed existing driver…
-
Move to the Embedded-HAL 1.0 driver, which has some changes to the I2C interface. Also, ensure compatibility with the embedded-hal-bus constructs.
I intend to add this support in the coming week. J…
-
I'm testing a MLX90614 (SEN0263, DFROBOT). MLX90614 module works properly on Arduino Uno or Mega. Howerver, the device cannot begin on Arduino Due (https://store.arduino.cc/products/arduino-due) with …
-
Hey Aaron, the day to night sensor gain seemed to work, ok, but doesn't seem to have worked the other way.
Either that or the sensor died overnight
### Relevant logs:
```
Jul 4 07:05:13 allsk…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
In Tasmota Main Menu, the temperature sensor Melexis MLX90614 is called "MXL90614". Please change to correct n…
-
Hi there,
It seems that i am not able to change the default io-pins for the i2c communication. It works fine with pins 4 and 5 defined in arduino-pins.h but not with 0 and 2. Pins 0 and 2 works fine …
-
I would appreciate any support!
Installed fresh on a rpi 5 with a ASA676 camera plugged in (fresh OS and installed a couple times just to make sure).
On the web UI the status shows as 'STARTING'…
-
I want to change the camera I use for Indi-allsky. Previously I was running an Altair Gpcam 130M. I've done an update and run sh.setup as per the instructions. I still can't see the new 678 on indi-al…