-
This is the result of an ongoing reflection with a bunch of .NETMF friends/supporters/users that's been happening in the past weeks.
Understand that we are doing this with a positive and constructive…
-
### Creating an image request
#### Formal device information
- Device name | Orange Pi Zero 2W
- Official product URL | http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-a…
-
As a part of the work with other SBC-s I did some research regarding how the Pi is capable of powering a HDD requiring 1Amp through an USB2 port. Good comment here https://dietpi.com/phpbb/viewtopic.p…
-
Iam still interested in estimating Solar Irradiance with a Raspberry All Sky Imager.
I would like to know, if the color calibration was already evaluated? How precise is the sRGB colour spaced pro…
-
i understand this binary package is copiled for armhf, am i correct?
i recently installed seafile server 6.3.4 on a [nanopi M4 running armbian](https://www.armbian.com/nanopi-m4/), which is a arm64…
-
I have succesfully built an image, but I need a `/lib/modules/6.1.31-sun50iw9/build` source folder. Do I have to change a setting in config somewhere?
-
Hi @initBasti
I have added support for a dual camera that seems to be OK but I can not figure out how to configure the cameras.
Here is the device tree for the second camera:
**rk3399.dtsi:*…
-
Using SET_PIN for laser raster engraving is very slow.
Same code runs much faster on marlin using m42 instead of SET_PIN.
Attached gcode to test.
Removing m400 will make execution asynchronous.
…
-
DietPi v7.4.2
Device model : NanoPi M4/T4/NEO4 (aarch64)
I set governor=performance, but cpu still only 1.8g max, how can I do ?
-
During file transfer (rsync) over a powered USB 3 hub from sda to sdb, the kernel disconnects the USB channel after a few minutes. The board needs be rebooted.
The failure occurs with the first me…