-
So I installed this, and don't see the controls. I have not hooked up the neopixels to the pi yet, but wanted the controls in. What am I missing?
-
I have a bltouch, TMC2130, neopixels all working with TFT35 v2.0 but i have found when leveling with bltouch my bed temp will not read but after probing it goes back to working.
-
I am starting to work with NeoPixels on the feather scorpio, and I can only find one example on `comet.mpy`.
I wanted to check out other animations (chase, colorcycle, etc.), but the .myp file form…
-
I'm excited about building this project, but I happen to have a 1 meter strip of 144/m APA102 LEDs, not Neopixels. Is there a modification I can make to the code that will let me run this type of addr…
-
Hello Jason!
When trying to compile I get this error - too many initializers for 'const uint8_t [100] {aka const unsigned char [100]}'Could you say that I have to change in the Map.h field for my n…
-
I'm trying to turn on a couple of NeoPixels before and after using the scripts but I believe the only way to interact with GPIO pins is with root access. Any help?
without sudo before my script I g…
-
Hello,
I'm working on a little project, where i can control my LED Strips over MQTT (with animations).
Every millisecond strip.show() gets called and everything works great with receiving commands.
…
-
We will be controlling the LED strips from a Raspberry Pi. We will need to control them from a program (written in Python, as much as I hate it).
[NeoPixels on Raspberry Pi](https://learn.adafruit.co…
-
They seem to work very similar to the NeoPixels, but are controlled through SPI instead of I2C.
So I assume it's a bit of work to support them with node-pixel?
-
I am trying to find a way to trigger gpio signals to control neopixels based on temperature data. So leds will be blue to red while heating up, white while printing and maybe green when done. can th…