-
Ippon BackPower Pro II 800
Looks like new version of Ippon BackPower 800 doesn't work correctly with blazer_usb driver.
ups.conf
```
maxretry = 3
[bckpwr_800]
driver=blazer_usb
port = aut…
-
Would it be possible to add support for basic UPS status--say batt level, temp, and offline / online status?
[PyNUT](http://www.networkupstools.org/docs/developer-guide.chunked/ar01s08.html) appears …
-
I try to make a Digitus DN-170010 to work with nut using a serial to usb adapter and the richcomm_usb driver.
I know that DN-170010 is not in the compatibility list, but at least DN-170014 is, whic…
-
Greetings, my UPS is this cat - https://www.cyberpowersystems.com/product/ups/pfc-sinewave/cp1350pfclcd/ - it is connected via USB to my Qnap NAS and is detected and monitored in the OS integration. I…
-
Switched from blazer_usb to nutdrv_qx
I have a Intelbras DNB1500 (Megatec protocol).
With blazer_usb the battery voltage is ok. (41 V) and with nutdrv_qx is repporting 2.28
NUT version 0.13.…
-
Hello, i have a APC SM750I and I bought the AP 9620 legacy card
These are the cables that came with me
- USB-RS232 cable Profilic PL2303
- Original APC cable RS232 to RS232
This is mine `ups.c…
-
Hi, I have **UPS Samurai SMART 1500 LCD** connected to Linux ARM device (OrangePi running Armbian). It seems some generic UPS device. `nut-scanner -U` says:
```
Scanning USB bus.
[nutdev1]
d…
-
nut-driver.service as well as upsdrvctl is unable to start any of my snmp-ups devices individually or collectively.
These are the errors I'm seeing:
[root@xxxxx run]# upsdrvctl start nutdev7
N…
-
Please add support for [NUT](https://tracker.debian.org/pkg/nut) (Network UPS Tools)
-
On an APC SMT1500C device using the rtu_usb version of libmodbus and a USB cable, reads fail with a timeout.
Since support for USB based APC Modbus is not mainlined, I am building the required RTU_…