-
### Checklist
- [X] 1. I have searched related issues but cannot get the expected help.
- [X] 2. The bug has not been fixed in the latest version.
- [X] 3. Please note that if the bug-related iss…
-
Check current device to limit the nodes to raspberry pi / clone boards
Security should be the priority while implementing this feature
Will require a 3rd party module/tool/library, requires furt…
-
Node 22 removed a number of APIs used by i2c-bus
-
pi@raspberrypi:~ $ ./rpi-check-in-printer/start_station.sh
PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data.
64 bytes from 1.1.1.1: icmp_seq=1 ttl=59 time=5.52 ms
--- 1.1.1.1 ping statistics ---
1 p…
-
Vulnerable Library - nodemon-2.0.22.tgz
Path to dependency file: /blockchain_integration/pi_network/smartship/package.json
Path to vulnerable library: /blockchain_integration/pi_network/smartship/n…
-
I'm trying to plot an .SVG file of 9MB with lots of tiny paths. Saxi runs on a Raspberry PI with 4GB memory. The path planning phase goes ok, but nothing happens.
I'm running the latest Saxi on Nod…
-
### Which node are you reporting an issue on?
node-red-node-pi-gpio
### What are the steps to reproduce?
use "pi-gpiod in" node (local RPi4) to connect to a remote input pin (remote RPi3+)
reb…
-
### Which node are you reporting an issue on?
node-red-node-pi-gpio
### What are the steps to reproduce?
Import this flow and in my case the pins are in the "stopped" state. Also when trying to s…
-
### Version
16.14.2
### Platform
Ubuntu 20.04.4 LTS
### Subsystem
_No response_
### What steps will reproduce the bug?
```shell
export 'CC_host=ccache gcc-9 -m32'
export 'CXX_ho…
-
## Bug Report
The node 3 is connect to an ASM1061 chip. This is apparent the reason the node is not booting. Most likely cause is the boot order which prefers the SATA disks over the eMMC.
### D…
jlec updated
2 months ago