-
Hi,
@jakkra @Kampi
Our board voltage is incorrect, and we suspect that the MCU is broken. Then, we replaced the MCU in the NORA-B10 module with a new one and used it in VS code to download the prog…
-
Hi
I am trying to create the ble project with blehci , created two target for nrf5340dk
![image](https://github.com/apache/mynewt-core/assets/102321386/5158c4c5-3d2c-4df7-83f7-59d506a2ba0e)
but sh…
-
## Introduction
Currently, the USB CDC ACM files (cdc_acm.h and cdc_acm.c) support a callback that is used for dte rate changes. I would like to follow this implementation to add another callback t…
-
Very similar to #30074, I have a setup, where reproducible the `z_spin_lock_valid()` assertation in `spinlock.h` fails.
Target is an nRF5340, where I'm running a QSPI-driver test program, that does…
-
The Nordic nRF52840 chip is inexpensive and has Zigbee ZBOSS support.
The [pca10059](https://www.nordicsemi.com/Software-and-tools/Development-Kits/nRF52840-Dongle) is only $10.
Nordic has an…
-
For the experiment with mobile lighthouse basestations we need the DotBots to be able to receive beams from 4 lighthouses at the same.
Not necessarily process them all, but at least support polynomia…
-
Hello,
I'm currently looking into writing an implementation for a Winbond W25N01GV NAND flash for ST MCUs over QSPI.
As I've seen there have been some others which have also done this (any source …
-
From what I can tell, compaction/garbage collection only occurs as the file system is being used (written to).
On devices with longer erase times (I'm currently looking at a part that takes 1.6 sec…
-
Raised in Discord https://discord.com/channels/720317445772017664/883445358821249084/1209677653259329568 but no response and this seems to pretty clearly be a problem in the STM32 driver inside the Ze…
-
nimble is portable both with respect to the operating system it runs on and to the radio modules, but starting at the project web page or repository it is hard to discover for which there is which lev…