-
### Description
Since the new version 2.3.8, error messages are displayed during the build process. No error messages appear in version 2.3.7.
### Steps To Reproduce Problem
The error occur…
-
### Description
We encountered an issue with the OneWire library on the ESP32-S3 when using pin 48. The library originally only supported pins up to 36. To enable the use of pin 48, we modified the O…
-
When compiling ESP8266 default_envs = nodemcuv2 or other, an error occurs.
And I have to add the OneWire library myself(
You forgot to add.
`Compiling .pio\build\nodemcuv2\src\WiFiSetup.cpp.o
C…
-
I think I know how to add ESP32 support to the MAX31850_OneWire library. The two steps below allow SigkSens to compile for both of my ESP32 boards, and my Wemos D1 mino Lite, with the MAX31850_OneWire…
-
The readme instructions on setting up an Arduino build environment do not include installing a OneWire library (and also DallasTemp library?)
-
Hi there,
i want to set up a direct wired DS18B20 temperature sensor via OWFS to HassIO.
After inserting `dtoverlay=w1-gpio` to `boot/config.txt` the device is listed at `/sys/devices/w1_bus_mas…
-
I need some library for OneWire and DS18B20 which is supported in Arduino.
Here are some information
https://www.pjrc.com/teensy/td_libs_OneWire.html
https://github.com/milesburton/Arduino-T…
-
Salut,
Je n'ai pas de onewire mais en debugant celui de tikismoke je suis tombé sur la perte des sensors progressive après plusieurs read.
> 2016-02-04 23:28:13,112 domogik-onewired INFO ==> Reading …
-
This will cause compile error with fresh versions of the SDK.
```
In file included from /home/runner/.platformio/packages/framework-arduinoespressif32/cores/esp32/Arduino.h:36,
from src/src/OneWi…
-
Working on a firmata implementation that would run on RP2040 wireless for an agriculture sensor project. Wrote a couple of i2c device support using firmata4j and everything works as expected.
Now n…