-
This project looks amazing. I want to order an ESP8266 OPENTHERM GATEWAY. And was looking at the code. But i wondered if more MQTT topics can be created. The gateway misses allot of functionality i gu…
sygys updated
2 years ago
-
Hi,
I'm use DIYLESS master shield. This shield have a temperature sensor connect to pin 14. How I can set it in yaml instead of HA sensor?
thanks
-
Hello
My boiler have limits 45-85C. But i want to set in opentherm PID settings limits 50-75C for water in boiler.
How i can set upper and lower limits in opentherm temostat?
-
This change would introduce the capability to link the underlying state of the heating system (e.g. 'heating', 'off') to the state of radiator valve.
It could work initially by getting the boiler s…
-
When installing the example yaml structure, I get the following message.
Source defined at: github://arthurrump/esphome-opentherm@main
INFO ESPHome 2023.10.6
INFO Reading configuration /config/es…
-
How does diyless's OpenTherm Gateway functionally differ from this OpenTherm Gateway: https://otgw.tclcode.com/ ?
I am only interested in home automation and flexibility type of functions. Will I …
-
Hi,
Today I install your code to ESP8266 and connect to the boiler. There is any option to send current room temperature to the boiler via OpenTherm standard?
On DeDietrich screen I have message …
-
When using
#include "thingProperties.h"
#include
an error is generated when compiling the code.
There seems to be a redeclaration of ' READ' (already used in ThingProperties).
Probably easy …
vdv-k updated
5 months ago
-
Hi,
Thanks for this project! It runs very smooth!
Only one thing I noticed is that I can't use OTA updates when including this library.
The problem is in the __timerISR but have no clue to so…
-
How would I go about to make this read only? I only want to read the boiler values, not control them.
Would removing the switch: and climate: controls from the opentherm.yaml be enough?