-
Hej,
have you ever considered to add a local temp-sensor readout to the firmware, using one of the unused ESP pins? With the one-wire sensors one pin can serve several sensors. Using this would req…
-
Hi Rob,
I was trying to get some OTGW info (flame status, dhwmode, chmode, faultindicator etc.) into my domoticz using the REST GET API provided by your OTGW-firmware. I wanted to do this by proces…
-
Hi,
I think it would be useful to expand the README.md and add some info comparing this firmware and its capabilities to alternatives. So far I have found the following:
A library to interface …
-
FYI.
When flashing new Wemos D1 mini with version 21 (OTGW-firmware.0.9.5+4eb7d24.ino.bin) the wif settings page is empty when Wemos restarts in AP mode.
As work around i flashed the wemos with…
-
Wondering if it would be possible in this firmware to add support so that thermostats that ignore msg9 remote override and get the firmware to step in as many seem not to support it.
My thoughts:
…
-
I had to disconnected my router for several hours few days ago and I noticed the gateway starts the public wifi after some time but reconnects if my router comes back online.
Are there any way to b…
-
Hi Ramon,
Thanks for the great effort and value you deliver for the community building these great APPS!
I use the Visonic app for years; it's awesome!
I have ordered the new OTGW from nodosho…
-
Setup:
OTGW v2.8
PIC16F1847 v6.4
Wemos D1 mini v0.10.0+eeeb22c
Domoticz 2022.2 - native OTGW interface using PS=1 mode
Remeha Calenta and iSense thermostat
Sporadically some OTGW sensors show …
-
### The problem
I used OTGW integration for several years with no problems. Recently I tried to switch on the heating in my house, but the whole integration was somewhat flaky. There was a very small…
-
I just tried to flash my d1 mini as described in the wiki.
When running the command as described:
`esptool -cp COM6 -cd nodemcu -cb 921600 -cf ino.bin -ca 0x200000 -cf fs.bin`
I get the following…