-
DesignSpark PCBで吐いたガーバデータを入力しても正常なNCコードが出力されません。
出力されるガーバデータの形式の問題と思われるので、もしかしたらDesignSpark側の設定をなんとかしてやればなんとかなるかもしれません。
DesignSparkでManufacturing Plotsする際の現在の設定は、ファイルの種類をGerber、PlotTypeをOutlineにしています。…
-
When uploading eseRC755 - Drill Ident Drawing - [Through Hole].gbr to PCB print it gives an error.
This file should be compatible with Gerber RS-274x. Please, review it or upload compatible file.
…
-
Given my recent experience buying a b1248 on eBay and actually receiving a gd1144 (incorrectly or deceptively labelled as a b1248), I thought I'd share the more promising prospects for online purchasi…
-
The current PCB is too fragile in
* Wire connection
* Should have a dedicated connector
* Board itself
* Thicker board
* Electrode connection
* Through hole should be a lot bigger
- [x…
dymnz updated
6 years ago
-
Leaving this here for anyone who runs into a similar problem, or maybe an addition to the FAQ or troubleshooting sections. My top case didn't _quite_ fit the PCB, and the problem ended up being the le…
-
Add a concept which (kind of) combines the ideas of a PurchaseOrder and a BuildOrder
- An external supplier provides a "process" which converts one part into another
- e.g. an anodization step tur…
-
## Capture notes on the assembly process in an issue as I go.
This can be put into a README.md or other markdown document later.
This content will be good for the Hardware X article.
Note: These …
-
Thanks for your work! The whole work is great, but for me, after some time of playing, the steering wheel enters the menu by itself. I don't have a d-pad (commented), but I see the s5 on the display a…
-
Anyone have trouble getting the KLOR printed with JLCPCB?
![CleanShot 2024-05-02 at 00 44 48](https://github.com/GEIGEIGEIST/KLOR/assets/5187394/261024d5-af21-406c-9103-fff94e60444c)
Seems odd t…
-
We'd like to make a smaller housing for the centrifuge that is designed to keep all the inner parts exactly in place in a minimal volume.
The current version is build with both 3D printed parts and l…