-
Hi,
I’ve been working through your guide on [Co-Simulating HDL models ](https://renode.readthedocs.io/en/latest/tutorials/verilator-cosimulation.html#co-simulating-hdl-models) guide and have success…
-
I do know the adapter, I have, and from my peripheral I do know both identifier and address. Is there a way do connect to it directly without having to go via `get_adapters` and `scan_get_results`?
ullix updated
2 months ago
-
I'm trying to play around with the synth project from the 2023 sycl conference and I'm getting a build error when trying to use the latest microzig version. I've made some changes to the build script …
-
I created this based on the STM32 example:
```
use anyhow::Result;
use esp_idf_hal::delay::FreeRtos;
use esp_idf_hal::peripherals::Peripherals;
use esp_idf_hal::spi::{config::Config, SpiDeviceD…
-
I was switching my project from manual interrupt handling to using embassy. In the process I also switched from blocking to async RMT. Before, I was sending about 150*24=3000 `PulseCode`s on each tran…
-
https://wiki.sipeed.com/hardware/zh/lichee/RV_Nano/5_peripheral.html
-
These are now supported in modern Arduino chipsets. here's an examples of how to create multiple I2C/SPI peripherals.
https://github.com/adafruit/ArduinoCore-samd/blob/master/variants/grand_central_m…
-
By esp32 -> classical esp32
Key observation is that it does work with gpio 15-18 for sclk,mosi,miso,cs and some minimal random other pin combinations, changing one or two of them, but most combina…
-
Test environment
1. Windows as central
2. Linux as peripheral
At the peripheral side on receiving SetConfiguration DBUS call, PipeWire does try to acquire transport which is failing. Tested on Bl…
-
> "POWAH"
> _someone, probably_
I am yet unsure what versions have CC compatibility, in my testing on 1.18 I could not detect any peripherals.
- [x] Energy Cell
- [x] Furnator
- [x] Magmator
…