-
Currently the z probing is cut to one-third speed if the probe is defined as analogue. This is not appropriate for analogue piezo probes.
Temporarily increasing the z axis max speed is not a workroun…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
I can't compile Marlin with the last version because it shows #error "Babystep_zprobe_o…
-
with the new version of jyers the nozzle temps extremely fluctuating between 190 -210 by an setted tem of 200.
i have done a pid tunnig , its done ok but after saving the fluctuating nozzle temp also…
-
Based on https://docs.google.com/spreadsheets/d/15hQWcMPxllfsKocRPlKsLv_q2vKkzzNmb2wYxA_VBTc/edit#gid=556274040
-
Hi, my setup is almst done (missing frame pieces), but i can adapt the ectronics to the machine
what is the minimun requirements (inputs/outputs) for this project?, (a Fysetc AIOII https://github.c…
-
### Bug Description
In a CoreXY printer, probing the bed (G30, M48 or G29 P1) while having at Y max causes the X and Y motors to rotate in a way that moves the carriage to the right OR sometimes once…
-
There is a board on ESP32. Compiled the firmware based on Marlin 2.0.9 and Esp3dlib. But there is no connection between the WEB interface and the firmware. A similar GR BL firmware works on this boar…
-
Hi!
[Description]
I use Marlin 1.1.9 bugfix and ender3 with piezo (underbed) from precisionpiezo.uk.
if timed out steppers and disabled, G28 or G29 running error (printer halted) after z is when …
-
Hi.
I have 3 TMC2130 and I'm trying to make a sensorless home.
Marlin settings in the attachment.
[Z-axis.zip](https://github.com/MarlinFirmware/Marlin/files/2108498/Z-axis.zip)
The problem is t…
-
### Description
tmc 2130's produce very loud grinding noise on fast movements. only seems to happen on quick movements in UBL or auto calibrate. moving quickly via pronterface does not seem to re…