-
**Describe the bug**
Intuitively, I assumed that some combination of "Start %", "Stop %", "Offset" and "Minimum %" would have accomplished what I was expecting.
Say you have a fan that doesn't s…
-
### Objective
Enable support for some other fan curves to maintain lower fan speeds.
### Initial Implementation Requirements
- options should be selected via configuration
- options should e…
-
Hi,
can someone tell me the PWM Pins for the Partcollingfan?
FAN0 and FAN1 is used for hotendcooling.
So i choose FAN2 for the Partcooling, but they just start working @80% and this is full blas…
-
I couldn't find your email address so I thought I'd report some positive testing results via an issue. No problems, just good status.
I'm running on Ubuntu 20.04 with kernel 5.4.0-56-generic on an …
-
Hi,
I am looking for some example code to control RC servo (like mini Servo SG90s) using CH32V003. The Arduino default Servo library is not compatiblee with CH32V003. Can anyone help to point me so…
-
Hi mates, here in Portugal we have a long Summer with high temperatures so many times we have problems with the receivers over heating, I know nothing about arduino, so I ask to you, it would be very …
-
hello users:
we are noticing there's a chance that set pwm value via FanSensor property will fail
and it's easy to reproduce the issue
/test log as bellow/
=================================…
-
Not sure this is an issue as I haven't actually started work on it. But I want to be able to connect 3 pwm fans and be able to read their rpm etc.
I have looked over the yaml and I assume I just copy…
B08Z updated
3 months ago
-
I can't seem to find a way to stop the fans. The obvious setDutyCycle(0) doesn't work.
In forums I've read that you can turn it off by switching pin mode to OUTPUT and digitalWrite(pin, LOW).
But …
ghost updated
5 months ago
-
Hello, I just installed a Corsair ML120 fan as you say and it works well except for the one when it reaches the stop temperature and it keeps turning at 1400 RPM. Could you help me create a stop or wh…