-
The manual focus is not "Infinity" when LensPosition is set to 0.0.
With LensPosition between 0 and 3, the horizon is blurred, it is clear when LensPosition = 4
My hardware is : Raspberry Pi Zero…
-
Hi all,
I'd like to start here a consolidated discussion about piaware's compatibility with Raspian Bookworm, which was released in October 2023. I've been cruising on Bullseye for some time, and "…
-
**Description**
Building the rpi-test-image or core-image-base with poky as the distro seems to result in an unbootable image for me on a Raspberry Pi Zero W (1st Gen). The ACT LED will flicker a few…
-
No Audio from Raspberry Pi 4 through HDMI, Heaphones, or DAC board
No Audio from Raspberry Pi 2 Zero Wireless HDMI
I am using latest version flashed directly from cloud.
I have tested with H…
-
#### What were you doing?
1. Use a LAN client and Switches with jumbo frames (e.g. MTU 9000)
2. Try to fetch the OctoPrint web interface
#### What did you expect to happen?
Web interface loa…
-
For the last 3 years, I've been running MotioneyeOS (from June 6, 2020) in a Raspberry Pi Zero W with a RPi camera module attached via the CSI camera connector.
motionEye Version 0.42.1
Motion Versi…
-
Hi,
I have a few questions to the raspberry pi camera-module 3 and its picamera2 lib:
- can you use the raspberry pi camera-module 3 with Raspberry Pi Pico, Raspberry Pi Zero W, and Raspberry Pi Z…
-
Running your library with a Raspberry Pi Zweo 2 W results in:
RuntimeError: ws2811_init failed with code -3 (Hardware revision is not supported)
Could you please add support for this Pi Version?
codac updated
2 years ago
-
## Expected Behavior
Unmodified build to succeed on any platform that Golang supports without any issues.
## Actual Behavior
Compilation fails on 32-bit systems with the following error:
```…
-
### What happened?
At the 'NPM CI' stage of install instructions, install never completes due to NPM error:
pi@pizigbee4:/opt/zigbee2mqtt $ sudo npm ci
npm warn deprecated inflight@1.0.6: This mo…