-
* Doc you were trying to follow:
* Your host OS:
* Your Python3 version:
Bash flash.sh results in:
downloading of 134217728 bytes finished
can't find partition: fbmisc, dump the partition…
-
### Describe the bug
**Issue**
Car struggles to accelerate smoothly when overtaking a car. Car also does not speed up to set speed when not lead visible.
**Attempted Troubleshooting**
Reflash …
-
i plug in my microbit into my kali linux machine and do `btlejack -i` and get `no sniffer found, (etc etc)` i have also tried it in matinence mode but still nothing?
-
Internet is down on vendo, there is internet on the upstream/wan but somehow the vendo still cannot get internet despite numerous changes like seting to static ip, change dns servers, soft reset/hard …
-
I was able to flash Canboot onto the SKR V1.4 using a raspberry pi connected to the board via UART using the tft pins and lpc21isp command below.
lpc21isp -wipe -bin ~/CanBoot/out/canboot.bin /dev/tt…
-
I've popped off the diffuser. All I see are the LEDs. I removed the 2 screws and I just see a bunch of thermal paste and a battery down in the neck. Is there something else down in the neck that I nee…
-
In GitLab by @sokril on Mar 26, 2020, 07:56
-
Hi.
I am new to Klipper. Just to verify ... is it possible to modify the printer.cfg to my own needs ? As i understand the "printer.cfg" is the main important file, that holds all parameters that a…
-
I know this project has been stale for a couple years now, but I figured it was worth a shot anyways.
I'm not an expert on using JTAG (actually, this is my first time using it apart from playing SV…
-
Is it possible to leave the Web Interface running? It closes after time when connected to a WIFI, but then I have no chance to change the ssid :) Or is there another way for changing ssid and Tally Ar…