-
Hi,
I started using Repetier-Host Mac a couple of days ago.
I like it, however sometime it crashes.
What reports/infos do you need?
lcis updated
12 years ago
-
I started in Debug mode and added a NSlog in PrinterSettingsController:
- (IBAction)applyButtonHit:(id)sender {
NSLog(@"bedFront = %f", bedFront);
[self saveToConfig];
[app->openGLView r…
lcis updated
10 years ago
-
It would be great if Repetier would use the Quick look feature to allow previewing of an stl file quickly, and an even further extension of that to see the G-Code generated 3d image. A feature like t…
-
Would it be possible to add the homing per axis for TinyG (g2core) firmware. Just check it and homing per axis on g2core works the same way as it does in Marlin and Repetier.
-
https://github.com/repetier/Repetier-Firmware/blob/eca23dd201e739ea49307a4be4ffcea7198c0982/src/ArduinoAVR/Repetier/Repetier.h#L1001
Hello there,
Thx for the work on the new SD-Lib. I pulled the…
-
Hello,
I use a cheap USB microscope ( the printer move the Head
- Switch to Control Tab, Check Nozzle 2 position
- Open your EEPROM Repetier Editor...
and so on up I got a perfect calibration o…
-
As a new user migrating over from Repetier, I noticed there aren't docs yet nor anything on the wiki.
I want to help document the software, and also help build the wiki.
Is anyone working on this ye…
-
Rick,
I made a polargrah like Sandy Nobles and a corexy like Axidraw.
Both can be controlled by your controller. Its clear that both Repetier and Marlin support them. But how about the penplott…
-
Hello
There is a possibility to print directly from Cura via USB cable. With the stock plate on ender 3 it went. Now I have skr3 mini. Repetier hosts the COM port and controls the printer.
Thanks
-
Hello.
Having issue with long pauses (>10s) during printing from SD card using MKS TFT32 (firmware TFT28_32_v3.0.3) and Repetier firmware (tried both 1.0.2 and 1.0.3) on Arduino DUE board (printer…
dell9 updated
4 years ago