-
Below is the Data from opening and closing the door after 2 sec 3 times in 10 sec intervals.
The opening is easy, but there is no (consistant) signal when closing the door, the 3rd try even crashed t…
-
### The problem
HI,
Got an 433Mhz RF emitter and receiver on an ESP32.
Both my emitter and receiver are working properly.
I'm capturing this data (protocol:8) from my remote :
`[I][remote.rc_sw…
-
It is a good idea to go deeper in the creation of code tests. This really will help to accept the contribution of other guys.
For instance, tests for KomaMRIFiles for pulseq files .seq.
- [x] Test…
-
Because the signal for this LED is the same signal as to the RF switch, it cannot be used in software. Further, it cannot reflect a valid antenna state as the signals that would enable this are not po…
-
I saw that the VBER has been implemented; I thought it would be useful for DVB to add other RF measures such as:
- Signal Strength
- C / N
- PreBER (BER before Viterbi)
- MER
- PER
- FER
- S…
-
**Describe the bug**
What is the expected behavior when two RM4 Pros are active? When They Are Swapped Out?
**To Reproduce**
Have two RM4 Pros visible to the Broadlink App. Test action of both ac…
-
Hi, Recently we noticed that the external reset registers, ( registers that gets reset using an external reset signal) that has resetsignal attribute causes an Error and hence cannot generate RTL.
…
-
Hi,
I am trying to copy my shutter remote's 433Mhz RF signals with SRX882 module connected to a D1 mini.
Running the receivedemo i can see local RF signals, but I can't see signals from my remote…
-
##### Expected Behavior
The RSPdx is a great radio - very sensitive but...
SDRplay has native support on URH, but the new RSPdx is not working correctly:
Device seen as "RSP 3"
Antenna A only is a…
-
hello and thank you for your repository.
its the only one that works 99.9% flawlessly with A25-TX028 controller. the 0.1% is just a request, to see if a remote follow operation can be integrated.
ie…