-
Hi I bought my MFRC22 Reader on amazon and wired it up. It was shipped with a blue round dongle and with a white blank plastic card. Both are reporting to be type ISO 14443-3A MIFARE Classic 1k
Usi…
-
## Bug
### What I did
Assign a RFID card ID to 2 system commands via the web UI
### What happened
The card ID is assigned to setVolume 75% and setMaxVolume 75% because I chose the wrong co…
jo-me updated
6 months ago
-
Hi I'm trying to control a RC522 NFC Reader with the SPI bus on the device, but I can't figure out how to make it work.
As a test, I use the DumpInfo sample from https://github.com/miguelbalboa/rf…
-
-
I am posting this to describe my experience in trying to get 5 RFID devices (MFRC522) to work at the same time using 1 Arduino.
This is also relevant to these posts:
https://github.com/miguelbal…
-
Hello,
I am using an ESP32 connected to a RFID-RC522 blue dev board via SPI. Arduino IDE with latest Arduino-ESP32 core.
Using your "Plain_ReadData" example, I am able to read the NDEF response fr…
-
https://www.elektronx.de/rfid-turoffner-mit-lcd-display/
-
-
-
I need little more help in another project RFID cloner I was unable to make tell if you have any of RFID cloner using rc522